Introduction

The purpose of this article is to answer common questions about the File processing module in XTM Cloud and to help resolve issues you might experience with it.

Questions and answers

What is hidden text in XTM Visual mode in general? When does it happen? What can be done to prevent it?

Hidden text in XTM Visual mode consists of elements such as image alternative texts (alt texts) associated with visual items. These texts can be displayed or hidden according to the user's preference. To show or hide hidden text in Visual mode, open XTM Workbench for your project, go to the Visual mode top bar menu, and select the relevant option as needed: Show hidden text or Hide hidden text.

Why are some inline tags grouped? Why are there inline tags missing at the beginning or end of the segment?

Inline tag grouping in XTM Cloud is a feature designed to minimize the number of inline tags displayed in a segment, so Linguists can concentrate on translation without worrying about tag placement. This feature can be disabled globally, per file extension, without affecting TM matching, and does not require reanalysis.

Similarly, the hiding of leading and trailing inline tags is another feature intended to improve the translation experience. This can also be disabled globally, per file extension. Both features deactivate automatically if the grouped or hidden inline tags inserted in a translation or match are in a different order from the source file. However, it's important to note that leading and trailing inline tags cannot be hidden in segments with internal matches.

Which file formats can XTM Cloud process?

Visit the following XTM Cloud help page, to see what file formats are supported, for translation in XTM Cloud: Language codes (select your XTM version and search for the phrase: Language codes).

What should I do if the target file fails to generate or does not look as expected?

If the target file fails to generate or does not look as expected, this could be for several reasons. One common issue is the misplacement or lack of inline tags, which can cause target file generation to fail. To troubleshoot this, you can check if XTM Cloud is able to provide a reason for the failure by selecting Project Editor → Files → (select the relevant target language) → Target → (click on the red exclamation mark icon). If the message does not tell you what is wrong with the file, you can create a simple TEST project that is exactly the same as your original one and try to generate the target file there. If the target file still has the same problem, you should also check for any misplaced inline tags and try again.

Another issue could be that the target has been generated but will not open due to misplaced inline tags. To search for misplaced inline tags, select Project editor → General info → General info, find the QA profile and edit it to deselect all checkboxes except for the Order of inline tags is changed or content is missing between inline tags in target segment checkbox in the Other section. Then, run the QA for the document, setting it to only list segments with warnings and review the segments to find any inline tags whose order has been changed incorrectly.

If target generation runs but never ends, this is likely to be due to stuck queues. In this case, you should raise a ticket with the XTM International Support team, on our Support Portal and provide the necessary information.

Lastly, if the target does not generate at all, the problem could be caused by headers. This issue is associated with the Initialization error in XTM Workbench. The solutions to this problem include reanalysis of the whole project or manual repair of the issue. More about it in this article: XTM Workbench – most common issues & troubleshooting.

What does the “not supported - without workflow” information mean in a project’s workflow?

This message means that the file intended for analysis is not supported by XTM Cloud. All the supported files formats are listed in Which file formats can XTM Cloud process?.

Can XTM Cloud process plural forms/ICU plural syntax, etc.?

Yes, XTM Cloud can localize plurals in several file formats including Android XML, DITA files, JSON with ICU syntax, PO/POT and stringdict. However, by default, plural localization is disabled. Plurals are grouped in keyword categories for naming forms: zero, one, two, few, many, and other. The other form is always required as it is used for something that does not match any other category.

How do I use a filter template in a project?

To use a filter template in a project, follow these steps:

1. Open the project in the Project Editor.

2. Select the General info tab.

3. In the General info section, select the required filter template from the Filter template dropdown.

4. Select Save to close the Project Editor.

5. In the Project list, find the required project, click on its context’s menu, and select Actions → Reanalyze project.

If the project has already been created, you can choose a filter template from the same dropdown in the project’s General info section. Remember to Save the change at the bottom of the page.

If you do not want to reanalyze the whole project, you can always upload a new file to it via the Files tab screen. This file can be added to the ones that are already present or replace one of them. In this case, only newly uploaded files are analyzed with new configuration rules. If you upload a file with the same name and extension as one of the source files, it will overwrite the content of the previous file during analysis.

The new or updated configuration is applied during the analysis step. If any changes are made to the configuration, full reanalysis of the project that was using this configuration must be performed to apply the changes to all the target languages/files.

Is there a difference between “parser” and “filter template”?

“Parser” and “filter template” are both broad terms for the file processing configuration, but in XTM Cloud, we use the term "filter template". You can either choose a project-level filter template (usually just called a filter template) or use a global configuration or a customer-specific configuration.

Can XLIFF source states be imported to XTM Workbench?

For XLIFF 1.2 files, the State attribute of a target element in a trans-unit is imported as a segment state in XTM Workbench. By default, signed-off is imported as completed, but we can also prepare a different mapping configuration if other XLIFF 1.2 states (as defined in the XLIFF standard) are preferred to be set as an XTM Workbench segment state. For more details, see How XLIFF/XLF Files are Handled as Source Files in XTM Cloud.

What is more, when uploading offline XLIFF files to a project, the relevant segments will be locked in XTM Workbench if any of the following attributes is used in the trans-unit node in the XLIFF file: xtm:locked="yes", xtm:locked="true", xtm:locked="y".

How do I change the segmentation in XTM Workbench?

If segments in XTM Workbench are separated with a dotted line, you might be able to merge them into one segment (by for example right-clicking on them), directly in XTM Workbench. Other changes will require reanalysis to be performed again. XTM International Support can change structure-based segmentation for any level or it can be changed at customer level, or globally, in the Analysis manager in the XTM Cloud UI. Sentence-based segmentation can be changed at any level in the Filter templates feature in the XTM Cloud UI, or by XTM International Support if you are unsure about regular expressions or not familiar enough with using them.

Why is the same segment processed differently in two languages?

The segment can be processed differently in different languages if it is a file with plurals (formats: Android XML, JSON with ICU syntax, PO, stringsdict (for more details, see How to configure plurals in XTM Cloud)). It is also possible that a source segment is the same but the inline tags are not grouped in one of the languages due to translation from a TM match.

Also, there might be different segmentation rules in different languages (e.g. one language is being segmented after a certain character, while the other is not).

Why am I unable to merge segments in XTM Cloud?

This might be for several reasons. One reason could be that the segments did not originate from the same paragraph in the source document. In XTM Workbench, segments from the same paragraph are separated by a dotted line, and only these can be merged. Segments from different paragraphs, separated by a solid line, cannot be merged. You can find more information about this in the following article: Merging/unmerging segments in XTM Workbench.

Another reason could be that one of the segments is in read-only mode, or one of them is a file repetition. These segments cannot be merged.

Displaying source files with long names in XTM Cloud

If you notice an issue while a source file with a very long name is being uploaded, the file name will be shortened automatically.

That is because the file name becomes incorrect when the path is too long. This issue is caused by operating system limitations and not XTM Cloud. The workaround is to insert the file in a ZIP file and then upload it.

What should I do if I want to configure custom variables, e.g. placeholders, in my translation files?

In the XTM Cloud UI, you can create a filter template that handles various custom variables, in the Filter templates section.

• See the article that describes the process of creating a filter template via the UI: How to create a filter template in the XTM UI and apply it to a project.

• Also, make sure to visit the official XTM Group documentation, for even better comprehension of the subject: Configuring custom variables in a new template at Project level.

What is more, you create a regular expression (REGEX) pattern that defines the variable text you wish to catch. Some common patterns are already suggested during the creation process, but you can create more complex ones yourself or use some online help. Feel free to explore various external tools that will help you build, test, and debug REGEX patterns, such as: https://regex101.com/.

If you are sufficiently familiar with REGEX patterns yourself, you can also make use of the ChatGPT AI tool, to help you with constructing appropriate patterns.

Should you need further help with setting up relevant custom variables, or with creating entire new filter templates, do not hesitate to issue a JSM ticket to the XTM International Support team (see the following article for more information: How to request a new configuration or change to an existing one).